Welcome to my website. I set this page up as a few people were interested in some of my hobbies. I'm currently living in Edmonton, Alberta, Canada and am presently without a shop to work in so the hobbies have slowed down.
I've tried to optimize my site but it is fairly graphics intensive. However it should load relatively quickly as I've done what I can to limit the size of the graphics. The page is setup and tested on MS Internet Explorer v6.0 and Opera v7.0 with the monitor resolution set to 1024X768 on a 17" monitor. This is not because I think this is the best, or only setup, just what I currently use.
I would appreciate any comments, either about the site or the
information contained on it. If you are unable to send me an e-mail by
clicking on one of the email links just use your email program and my
email address of :
. Unfortunately I've had to take some steps to hide my
email address due to all of the spambots on the web which grab email
addresses for the purpose of sending spam. The email address above is
actually a graphic so you have to actually type that into your email
program to send me a message. The email links are cloaked to make it
harder for the spambots so may not work for everyone.
Enjoy,
Updates
- March 23, 2010
- Repaired several broken links.
- February 12, 2007
- Repaired broken links and made minor editorial changes.
- March 30, 2006
- Repaired several broken links, added some pictures to the people page..
- March 28, 2004
- Repaired several broken links.
- February 12, 2004
- Made some very useful (and free) programs, BeamBoy, Convert, ME Consultant and ME Threads, available for download on my shop page.
- February 10, 2004
- Updated some information on my links page.
- January 28, 2004
- Changed my email address and tried some new cloaking techniques for it so hopefully it won't get picked up by the spammers as easily.
- January 23, 2004
- Repaired some broken links.
- September 20, 2003
- Repaired some broken links and added some pictures to the Electrolytic Rust Removal page.
- September 17, 2003
- Added some some reference information pages, Tap Drill Charts, Machine Tapers, and General References.
- August 31, 2003
- Added some a page with information on Electrolytic Rust Removal. Added a Foundry Test page with information on the casting of a cup, saucer and spoon as a test of skill (or lack thereof). Also some small editorial work on several pages.
- July 28, 2003
- Updated some information on the HOME page and added some pictures and information on my new job in the WORK page. Added some information about a new casting on the PROJECTS page.
- March 18, 2003
- Updated the entire site to remove frames.
- March 5, 2003
- Updated the LINKS page to include a list of books that I found useful for my shop work.
- February 8, 2003
- Updated page on my MAXIMAT to reflect the new change gears.
- January 8, 2003
- No major changes, just some editorial work.
- January 7, 2003
- Added pictures of a stand I built to the PROJECTS page and pictures of some friends to the PEOPLE page. Added a link to the website for the Opera web browser on the LINKS page.
- December 24, 2002
- Removed dead link from CANADA page.
- November 11, 2002
- Removed dead link from PROJECT page.
- October 2, 2002
- Corrected an error in the drill sizes chart.
- September 17, 2002
- No major changes, just some editorial work and changed the email address for feedback.
- June 29, 2002
- Updated the LINKS page with information on some books I recommend and added a link to a used book search site. Added more information to the GATING page.
- June 27, 2002
- EDM page updated with pictures of the control pcb and the HOTWIRE FOAM CUTTER is complete with the information updated on its page. Repaired broken link to Canadian facts on the CANADA page.
- June 22, 2002
- Added an OTHER page which I plan on putting stuff which doesn't seem to fit anywhere else. It currently has some information on a couple of games I wrote for the HP100LX/200LX palmtop computers.
This website and all of its contents (except
where specified)
are Copyright © 2001-2010 by Al Schoepp. All Rights Reserved.